How to replace the coolant filter? Consulting Starlight Technology Department 18609915083

How to replace the coolant filter? Consulting Starlight Technology No. 0991-3856119, 0991-3817210, 0991-3814032

Specific steps are as follows:

1. Turn the valve to 90 degrees to prevent the coolant by the coolant filter.

2. Remove the coolant filter with a suitable filter wrench. It is ensured that there is no residue of the old seal on the base of the filter.

3. Shine a layer of engine lubricating oil on a new coolant filter seal ring. Use your hand to scroll the coolant filter, guide the sealing surface of the rubber seal primary filter, then the coolant filter is tightened 1/2 lap

4, turn the valve (1) 90 degrees to re-let the coolant pass through the filter

5, start the engine, and check if there is no leak

6, stop the crane to check the coolant level. Please refer to \"Check the Coolant Body Bit \".

See you more information:Www.xjxgdl.com18999222000, 13809953146, 18609915083