Views:0 Author:Site Editor Publish Time: 2013-03-29 Origin:Site
Our company's technical service department tells the majority of attention when the engine is in the cooling liquid
Warning Tip: Do not open the coolant hemata when the engine is high temperature, and the steam or high temperature coolant will be injected when the pressure is removed.
1. Remove the plug cover
2. Open all the water supply valves. The coolant in the heat sink is discharged with a water hose, and the discharge valve is located below the heat sink.
3. Make sure all of the coolant has been taken. In the inner cavity of the discharge valve / water, it may be deposited, and it must be removed. Otherwise, the coolant will remain in the engine, causing serious damage, check whether the low point of each coolant system is equipped with additional water absorbing valve.
4. Turn off each water supply valve to reload the blockage
More related information to see the official website of Starlight Generator:Www.xjxgdl.comDetails Consultation Technology: 0991-3856119, 0991-3817210, 0991-3814032, 400-0991036