Xinjiang Starlight Automation System Czech Komai Control Description

The Czech Komai Controller is an engine self-start control module that is used automatically or stops.Generator set, Display the operating state, fault condition, automatic emergency stop engine, indicating the failure of the engine with a flicker of the LCD with a flash on the front panel. Time adjustment and alarm selection can be set by the front panel without increasing other dedicated devices to set.

Czech Ke Mai generator set control description
I. Overview
The Czech Komai IL-NT MRS16 controller uses microprocessor technology to realize precision measurement, set value adjustment, and timing, threshold tuning, etc., all parameters can be adjusted from the front panel of the controller, and PC can be used The machine is adjusted by programming interface. Its compact structure, simple wiring, high reliability, can be widely used in various types of generator sets, water pump unit automation systems.
Second, performance and characteristics
The IL-NT MRS16 controller is a MRS16C enhanced stand-alone self-starting module with a commercial monitoring and maintenance-saving control function (AMF), which is especially suitable for a single-machine automation system.
Its main features are as follows:
LCD shows the LCD 128x64, with backlight, two languages (Simplified Chinese, English) show, tap button operation;
Suitable for three-phase four-wire, single-phase secondary, two-phase three-line (120 / 240V) power supply 50 / 60Hz system.
Collect and display the mains / power generation three-phase voltage, three-phase current, frequency, and power parameters
Municipal electric power generation
Line voltage UAB, UBC, UCA line voltage uab, ubc, uca
Phase voltage UA, UB, UC phase voltage UA, UB, UC
Frequency F1 frequency f2
load
Current IA, IB, IC
Power PWR
Reactive power PWR
Viewing power PS
Power factor PF
Power generation accumulated electric energy KWH
The main electricity has overvoltage, undervoltage, short-phase function, power generation has overvoltage, undervoltage, overspeaking, arreterual frequency, overcurrent function;
Precision to collect various parameters of the engine:
Temperature WT ° C / ° F
Oil pressure OP KPA / PSI / BAR also display
Fuel position FL unit:%
Speed SPD unit: rpm
Battery voltage VB unit: V
Charger voltage VD unit: V
Timer HC can accumulate 999999 hours
Cumulative startup ZUI can be accumulated 999999 times
Control protection function: realize the function of automatic power-on / shutdown, closing lock (ATS switching) and perfect fault display protection;
It has a power-free shutdown, idle speed control, and preheat control function, and is the relay output.
Parameter setting function: Allow users to change their parameters, while memories are not lost during the internal Flash memory, all parameters of the controller can be set on the front panel, or by programming port PC test software for setting (using SG72 adapter);
A variety of temperatures, pressure, oil level sensors can be used directly, and can customize parameters;
A variety of start-up success conditions (speed sensor, hydraulic pressure, power generation) can be selected;
The power supply range is wide (8-35) VDC, which can adapt to different boot battery voltage environments;
All parameters use digital adjustment, abandon the simulation adjustment method of conventional potentiometers, and improve the reliability and stability of the whole machine;
Modular structure design, pluggable terminal block, embedded installation method, compact structure, easy installation

Xinjiang generator set control system technical support hotline: 18999222000, 0991-3817210

Xinjiang generator set sales hotline: 400-0991036, 19609915083