Why does the generator group do not allow small load operation?

Since there are more pressure seals in the engine, this seal is generally fully functional when the engine has about 1/3 of the load, and the load hour may have a slight leakage phenomenon. Therefore, foreign engine manufacturers are generally Give emphasis. If the generator sets run under small load, the following faults will occur as the running time continues:
1, the piston - the cylinder liner is not good, the oil is over, enter the combustion chamber, and exhaust the blue smoke.
2. For booster diesel engines, due to low load, no-load, low pressure pressure. It is easy to cause the sealing effect of the supercharger oil seal (non-contact) to fall, the oil is blown into the pressurized chamber, and the intake gas is entered into the cylinder.
3. Some oils from the top to the cylinder are involved in the combustion. A portion of the oil cannot completely burning, and it is easy to form a carbon, and some of them are discharged. In this way, the cylinder sets will gradually accumulate oil, and the carbon is also formed.
4. The supercharger indoor oil accumulated in the supercharger is accumulated to a certain extent, and it will leak from the combined surface of the supercharger.
5, long-term small load operation will lead to more serious causes of moving parts, and the deterioration of engine combustion is caused by the advanced consequences.

Jiangsu Xingguang Power Generation Equipment Co., Ltd. has a test equipment, advanced production technology, professional manufacturing technology, perfect quality management system, strong research and development technology strength, with 64 sales service department, ready to provide installation, commissioning, maintenance for users Train services.

Our company sells all the year round of Pains, Cummins, Volvo, Shangchai, Yuchai, and Weichai, etc. throughout the country, and provides after-sales service. Service Hotline: 0991-3856119 0991-3817210 0991-3814032 13809953146 18999222000 18609915083 4000991036