What are the use and precautions of the charging generator of diesel generator sets?

1. The charging generator must be used in conjunction with the corresponding charging generator regulator and battery.
2, the wiring must be correct and reliable, positive, and negative is unable to get the wrong, otherwise the silicon rectifier generator and the charging generator regulator will be damaged.
3, the front and rear end cover is equipped with a rolling bearing, which is lubricated with composite calcium based grease. It should be replaced once every 750 hours. The amount of filling should not be too much, especially in the rolling bearing of the rear cover, such as the addition of excessive addition to the grease overflow, splashing on the slip ring will cause contact, affect the performance of the generator.
4. The windings of the generator are wound by the polyester high intensity lacquered wire, allowing temperature rise 105 degrees, so the temperature of the generator windings allow for 105 degrees in the environment. So check whether the temperature rise of the generator is normal during normal operation, and cannot simply rely on the feeling of manual touch.
5, when the generator is running, the metal item such as a screwdriver (screwdriver) is not allowed to short the positive electrode and the housing or negative electrode to observe whether the spark is to determine whether the generator is generated, so it is easy to burn the component.
To learn more, maintenance, maintenance technology calls to our company: 18999222000 138099953146 18609915083 0991-3817210 0991-3814032 0991-3856119 400-0991036