The so-called one-step fault, the error operation of the generator set will affect the life of the generator set

my companyGenerator setTechnical Department summarizes errors that generate events often occur

Dienote oil generator error Operation 1: Diesel engine is running when the oil is insufficient
At this time, it will cause insufficient oil supply from the oil supply due to insufficient oil supply, resulting in abnormal wear or burns. To this end, the diesel generator starts before the start of the diesel engine to ensure that the oil is sufficient, preventing the pull tacho, a flask failure due to lack of oil.
Diesel generator error operation 2: Turn on the load or suddenly remove the load
The cycle of cooling water after the diesel generator is turned off, and the heat dissipation capacity is dramatically decreased. The heat is loses cooling, which is easy to cause overheating of the cylinder head, cylinder block, cylinder block, etc., produce cracks, or make the piston over expansion card dead in the cylinder set Inside. On the other hand, the diesel generator is not turned down at the time of shutting down, and the friction surface is insufficient, and the wear is exacerbated when the diesel engine is started again. Therefore, the diesel generator should be removed before the fire is turned off, and gradually reduces the speed, and the no-load is running for a few minutes.