Rules and characteristics of the use of diesel generator set oil pump

1,柴Oil-generating machineThe group should check the model and the specification is correct before installing the oil pump, and clear the anti-rust oil. The thickness of the choice should be appropriate. In order to avoid the piston is killed or not in place, it should prevent the gasket from being thin or too thick, tightened. The tightening force torque when the bolts are uniform to prevent damage to the oil pump.
2, the hand oil pump piston on the oil pump and the rubber sealing device between the hand oil pump body, do not be free to disassemble, find that the rubber ring is damaged in time.
3, the rough filter core in the oil pump joint is easily blocked by dirt, such as cotton bars, and often checks cleaning, and the filter is damaged must be repaired or replaced in time.
4. Make sure that the gas generator seal oil pump is completely non-destructive, and the number of plastic swear disassembly is not too much, and should be replaced regularly.
5, to ensure that the plunger oil pump \"four reed \" is flexible. \"Cai Xi \" is a piston spring, a tappet (roller) spring, an oil supply valve spring, an oil valve spring, spring elasticity reduction or break to be replaced or padded in time to avoid damage to the generator set.
6, the generator set must be pressed back after the hand oil pump, and the button is tightened, preventing the fuel pump and the gum or ball valve and the valve seat causes intake or oil leakage.
7. When the generator set is in a downtime, the oil pump is prevented from being mixed with the surface, especially the piston and the pump body, the tappet and the tappet suite, which must be rust-resistant measures, that is, when the generator set When downturn, replace the oil-in-oil undercarchers with moisture, diesel and other impurities.
8, the filling power generator oil should be filtered by precipitation, to ensure cleaning, prevent excessive impurities, excessive oil pump, oil pump, oil pump, the oil valve, the wear of the valve seat, sometimes the oil valve will even be fade from the impurity pad.