Replacing engine oil for B-class maintenance of diesel generator sets

When every \"b\" level maintenance check, complete all \"A \" level check items, but also add the following items.

Replace the engine oil
Check the main items and the results of the results of the oil analysis results are listed below
1. The start of the engine reaches the working temperature, stop the engine, remove the oil screw from the bottom of the oil pan, and discharge the oil.
2. Put the oil drill back.
3. The \"h \" high mark on the crankcase is raised to the machine oil.
4. Opening the engine and taking the inspection of no oilproof.
5. Stop the launch; wait 15 minutes to stand back to the oil disc in the oil disc, re-use the oil level inspect the oil plane. If necessary, add it.
Note: When replacing the oil, replace the full-flow oil filter, a narcotic oil filter (if used) and fuel filter.

Lubricating oil replacement cycle is based on the following variable factors
1. The amount of fuel consumption per hour.
2. Each hour oil consumption is consumed.
3. Filter system.
4. Lubrication system capacity.

Jiangsu Xingguang Power Equipment Co., Ltd. has test equipment, advanced production technology, professional manufacturing technology, perfect quality management system, strong research and development technology strength, with 64 sales service department, ready to provide users with diesel generator set equipment installation , Debug, repair a dragon service.
Our company sells all the year round of Pains, Cummins, Volvo, Shangchai, Yuchai, and Weichai, etc. throughout the country, and provides after-sales service. Service Hotline: 0991-3856119 0991-3817210 0991-3814032 13809953146 18999222000 18609915083 4000991036