Views: 0 Author: Site Editor Publish Time: 2018-04-13 Origin: Site
The boost diesel engine is not very good because of the relatively low compression, in order to improve the low temperature starting performance, it is generally provided with an intake preheating device on the diesel air intake. 1. After the boosting diesel engine is started, it must be accelerated after the oil pressure is increased. Otherwise, it is easy to cause the supercharger bearing burns; when the diesel engine is replaced, the supercharger, the filter or replace the filter element and stop, After the start, loosely loose the oil pipe joint on the supercharger, and tighten it after the standby oil overflows. 2. Avoid running up for a long time, preventing the supercharger oil from leaking into the compressor and causing exhaust pipe engagement oil. 3. After the new diesel engine or replace the supercharger, remove the oil pipe joint, add 50 to 60 ml of oil, prevent the boiled supercharger bearing due to lack of oil. 4, the diesel engine is not allowed to stop in the high speed operation. It should be idled from 2 to 3 minutes before normal shutdown to prevent superheat superchargers from being bissed. 5. In order not to affect the technical performance of the diesel engine, it should always be kept inward and the sealing of the exhaust line. If the sealing gasket is damaged, it should be replaced in time.
Jiangsu Xingguang Power Generation Equipment Co., Ltd. has a test equipment, advanced production technology, professional manufacturing technology, perfect quality management system, strong research and development technology strength, with 64 sales service department, ready to provide installation, commissioning, maintenance for users Train services.
Our company sells all the year round of Pains, Cummins, Volvo, Shangchai, Yuchai, and Weichai, etc. throughout the country, and provides after-sales service. Service Hotline: 0991-3856119 0991-3817210 0991-3814032 13809953146 18999222000 18609915083 4000991036
