Maintenance knowledge after the generator set

Maintenance knowledge after the generator set
For some diesel generators in outdoor, it is often affected by the weather factors, especially after the rain weather unit is wet, it will not be repaired in time, which will cause corrosion, corrosion, and damage.
1. Rinse the exterior of the diesel engine with water, remove the soil and debris, then remove the surface of the surface with a metal cleaning agent or laundry powder.
2, one of the ends of the diesel engine, so that the oil bottom shell oil is in Zui low position, rotate the oil rush, pull out the oil rib, so that the water in the oil casing is out, when flowing to the oil Slightly let the oil and water come together and remove the oil rush.
3. Remove the air cleaner of the generator set, remove the filter, remove the filter, etc., remove the water in the cleaning filter, and clean the parts with a metal cleaning agent or diesel. The filter is plastic foam. It is to be washed with laundry powder or soap water (disable gasoline), then purify it with water, dry it, and then immerse it in an appropriate amount of oil (so on the efflexion). Immersions should be made when the new filters are exchanged. The filter element is paper, to be new. After the filter is cleaned, after drying, then install it according to the regulations.
4, remove, exhaust pipes and muffler, exclude internal deposits. Open the decompression, turn the diesel engine, see if the exhaust port is discharged, and if the water is discharged, the crankshaft is continuously turned to the water in the cylinder. Install, exhaust pipe and muffler, add a little oil, shake the crankshaft plug, and then install the air filter. If the diesel engine is long, the flywheel is difficult to rotate, and the cylinder line, the piston ring has been rusted, and the rust should be removed, clean and then assemble, rust and severely replace it.
5, remove the oil tank, put all the oil and water all. Check if the diesel filter and the tubing have water, if there is water, it should be purified. Clean the fuel tank and diesel filter, then install back to the original, turn on the oil, add a clean diesel in the tank.
6, release the sewage in the water tank and the waterway, clean the waterway, add a clean river or boiled well water to the water float. Open the throttle switch and start the diesel engine. After the diesel engine is started, pay attention to the observation of the oil indicator to rise, listen to the diesel engine has no abnormal sound. After inspection, each part is normal, the diesel engine is measured, and the time is idle, the second speed, and high speed, and the operation time is 5 min. The oil is turned out of the oil after moving. Re-add new oil, start the diesel engine, run 5 min in the medium speed to make normal use.
Take the above approach to restore the generator set to ZUI, eliminate the safety hazards running in the later operation. Of course, if your generator set must not have an outdoor application, ZUI is easy to obscure, prevent unnecessary losses caused by sudden weather.