How to replace the lubricant filter / bypass filter? Consultation Starlight Technology Department 18999222000

How to replace the lubricant filter / bypass filter? Our company's technical service department tells you!

Warning Tip: High temperature lubricants will cause serious burns

1, clear lubricating oil filter

2. Remove all lubricating oil filters with a suitable filter wrench

3, clear filter base cover, ensure that there is no sealed residue

4. Shine a layer of engine lubricating oil on the sealing ring of the new filter

5, install a new lubricating oil filter. Two full-stream filters should tighten 1/2 to 3/4 laps after their sealing surfaces are tightened. The bypass filter should tighten 3/4 to 1 lap after tightening after its sealing surface

6, add a lubricant, start the engine and run 20-30 seconds

7, stop, check the lubricant oil level and press Add

8, check the sealing of the lubricant filter

Our company supplies emitting machine parts, diesel filter, oil filter, air filter, welcome to consult Gu Xiaobing 1899222000, 13809953146, 18609915083, generator set technical support hotline: 0991-3856119, 0991-3817210.0991-3814032