Homepage / news / Technical Support / How to replace the fuel thickness filled with an inlet sensor? Star Technical Department tells you
How to replace the fuel thickness filled with an inlet sensor? Star Technical Department tells you
Views: 0 Author: Site Editor Publish Time: 2013-03-31 Origin: Site
How to replace the fuel thickness filled with an inlet sensor? StarlightGenerator setTechnical department tells you: 0991-3856119, 0991-3817210, 0991-3814032
1, around the cleaning fuel filter
2, release water sensor
3, empty fuel filter
4. Remove the fuel filter with a suitable filter wrench
note! ! ! If you are not prepared to replace the filter with an oil-water separator, the inlet sensor should be moved to the new fuel filter.
5, cleaning pad on the filter
6. Show a layer of lubricating oil on the seal ring, and explain the new fuel filter according to the filter.
7, street inlet water sensor
8. Start the engine and check without leakage
More related information consulting our company Power Generator Sales: 18999222000, 13809953146, 19609915083