How to replace the fuel filter of diesel generator set
Views: 0 Author: Site Editor Publish Time: 2019-04-13 Origin: Site
1. Clean the fuel filter around the fuel filter;
2, release the water water sensor;
3, empty the fuel filter;
4. Remove the fuel filter with a suitable filter wrench;
note! ! ! If you do not prepare a filter with an oil-water separator, you should move the inlet sensor to the new fuel filter;
5. Clean the gasket on the filter.
6. Show a layer of lubricating oil on the seal ring, and explain the new fuel filter according to the filter;
7, connect the water inlet sensor;
8. Start the engine and check if there is any leak.
Jiangsu Xingguang Power Equipment Co., Ltd. was founded in 1974 and is one of the earlier manufacturers of domestic generator sets. There is a 64 sales service department in the country, which is ready to provide design, supply, commissioning, and repair a dragon service for users. Since 1982, the company has always been the \"National Internal Combustion Engine Generator Group Quality Supervision and Inspection Center\". At the end of 2001, the product quality passed ISO9001 standard certification. The Xinjiang Office of the Company was established in 1995 and has long-term imports, joint ventures, domestic diesel generators and spare parts for the majority of customers for 30KW-2000KW. support hotline:18999222000!
