Views: 0 Author: Site Editor Publish Time: 2015-04-12 Origin: Site
Summer is coming,Diesel generator setsDuring use, the temperature is too high, causing thermal expansion of the machine to cause insufficient air air inflation, and the power is lowered. Therefore, the quality of the cooling technology is directly affected by the work of the diesel engine, and it is especially necessary to strengthen the maintenance of the cooling system. Regular cleaning Cooling Cooling system Easy to jet meal affects heat, each model should be cleaned as required, such as a 290,295 diesel engine for 1000 hours, and the 485 diesel engine works after 720 hours. Washaw method: Wash the cooling water, remove the thermostat, add the cleaning liquid (formulation method: 60 liters of water added 4.5 kg of boar base and 1.5 kg of alcohol), start the diesel engine, slowly running slowly when the speed is fast, the water is warm When it is 70-80 ° C, it is left for 10 hours, and it is started to run for 5-10 minutes in the medium speed, then put the net cleaning liquid, add clean water, and operate in the medium speed 4-5 minutes; Time. It should be necessary to check the water tank water level before the diesel engine is started; the water level of the closed cooling water tank must be higher than the heat sink core tube, and must not be lower than the overflow pipe 8 cm, and it should be added in time. You can use soft water such as pond, river, rain, rain, etc. When the machine is too high, it should not be added immediately. After the engine idle operation is cooled, the cooling water is slowly added to prevent the body quenching or cracking; when opening the water tank cover, the head must not align the water tank port, waterproof The steam rolled out. Strengthen the inspection of the components periodically check the thermostat, to prevent the failure of the heat dissipation of the heat: remove the thermostat, remove the oil after the oil is added, normal, the water temperature rises to 70 ° C, main valve door Start opening, until 80-85 ° C should be fully opened. Pay attention to adjust the tension of the fan belt, for example, the fan belt of the 195 diesel engine is 20-30 mm, otherwise it should be adjusted; usually avoid in the belt against oil and exposure, such as belt aging or The crack should be replaced in time; if the crankshaft, fan, the three pulses on the generator (not in the same plane) should be adjusted. Do more than the above points, basically guarantees that your diesel generator can be a cool summer, carefree. Our company mainly focuses on the 190 diesel generator set. Welcome to purchase our 190 series diesel generator set.