Diesel generator set automatic switching steps

Starlight /Diesel generatorsGroup: Self-switching cabinets (also known as ATS cabinet, dual power automatic switching cabinet, dual power supply automatic conversion cabinet) mainly used automatic switching between main power and emergency power supplies, composed automatic emergency power supply with self-start diesel generator sets The system can automatically switch the emergency lighting, security power, fire equipment and other loads to the generator set after the main power supply is powered off. It is a hospital, bank, telecommunications, airport, radio, hotel and factory enterprise emergency power supply and fire power supply. Or the disadvantage of power facilities. ATS automation capacitors have 2
1, module manual mode of operation:
After opening the power key, press the module \"Manual \" button directly, and when the unit starts successfully running properly, the automation module will enter the self-test state, which will automatically enter the boost state, and the successful rear unit will be successful. Enter Automatic Closing and Netgardial Network according to the display of the module.
2, fully automatic mode of operation:
Setting the module in the \"automatic \" position, the unit enters the quasi-start state, in the automatic state, automatically long-term detection of the mains in the mains state by the outer switch signal, and discriminate. Once the city is faulty, when it is disappeared, it will enter the automatic start state. When the main electricity is incorporated, it will automatically switch the cutting downstream stop. When the market is constantly returned to normal, the system is confirmed by the system 3S, the unit automatically trips to retreat, delayed for 3 minutes, automatically stops, and automatically enters the next automatic start-up preparation state.
First, turn on the power key directly to press the \"Auto \" button, the unit will automatically start the speed, when the Haf table, the frequency table, the water temperature meter is displayed normally, he will automatically connect the power and network. Quasi-state automatic control, auto-detection, automatic network, automatic network, automatic shutdown, automatic shutdown, fault, shutdown, alarm.