Diesel generator lubricating filter and air filter replacement method

Our company's technical service department tells you how to replaceDiesel generatorsLubricating oil filter and air filter.

1. It is clear which part of the unit in the unit;

2. Remove all lubricating oil filters with a suitable filter wrench;

3, clear the cover of the base of the filter, ensuring that there is no sealed residue on its base;

4. Shine a layer of diesel engine lubricating oil on the sealing ring of the new filter;

5, install a new lubricating oil filter. Two new filters should be tightened from 1/2 to 3/4 laps after their sealing surface is in contact. Air filter should tighten 3/4 to 1 lap after contact with its sealing surface;

6, add a lubricant, start the engine and run 20-30 seconds;

7, stop, check the lubricant oil level, and add lubricants;

8. Check the sealing of the lubricant filter.

Warning Tip:High temperature lubricants will cause serious burns!

Jiangsu Xingguang Power Equipment Co., Ltd. was founded in 1974 and is one of the earlier manufacturers of domestic generator sets. There is a 64 sales service department in the country, which is ready to provide design, supply, commissioning, and repair a dragon service for users. Since 1982, the company has always been the \"National Internal Combustion Engine Generator Group Quality Supervision and Inspection Center\". At the end of 2001, the product quality passed ISO9001 standard certification. The Xinjiang Office, Jiangsu Xingguang Company was established in 1995, and has long-term imports, joint ventures, domestic diesel generators and spare parts to our customers with 30KW-2000KW. support hotline:18999222000!