Views: 0 Author: Site Editor Publish Time: 2014-04-09 Origin: Site
1. The installation location requires good ventilation, diesel generator divides diesel engine and generator two parts, of which the generator should have sufficient air outlets, and the diesel end should have a good ventilation. The exit area should be more than 1.5 times the area of the water tank. 2. The surrounding place should be cleaned to avoid placing an article that can produce acidic, alkaline etching gas and steam nearby. Conditional should be configured. 3, in indoor use, the exhaust pipe must be opened out of the exhaust pipe, the pipe diameter must ≥ the tube diameter of the muffler, the elbow of the pipeline should not exceed 3, to ensure smoking, and should take the pipe Tilt down 5-10 degrees, avoid rain water injection; if the exhaust pipe is installed vertically, it must be installed. 4, when using concrete, it is necessary to use horizontal measurement at the time of installation to fix the unit based on the level. There should be special anti-shock pads between the generator sets and the foundation, or a shock absorber with a foot bolt (modern diesel generator set, which can be made of concrete). 5, the housing of the generator set must have a reliable protection ground
