Diesel Engine \"Three Leaks \" What happens? How to govern?

Diesel generator sets \"three leaks \" is a brightest diesel oil leak oil, leaking, leaking. Diesel machine \"three leaks \" is very harmful:

First, add oil consumption, waste energy, and increase operating costs;

Second, accelerate the wear of mechanical parts, the technical state is deteriorated, and the power is lowered;

Third, shorten the service life of mechanical parts and increase repair costs;

Fourth, it is prone to accidents;

5. Impact the car appearance and machine neat;

Sixth, polluting the environment.

Therefore, if the diesel engine occurs \"three leaks \", it should be repaired in time. Here, several ways to govern \"three leaks \" methods are introduced, and the piping is trial.

First, the cord treatment leakage: the diesel oil pipe joint leakage gasket is leaked, and a layer of double-smooth thin plastic pad can be added to both sides of the leakage gasket, and tighten can be leaked.
Second, lacquer tickle leakage: diesel oil tank, water tank, crankcase and other seams leakage, after immersing in alcohol, apply the lacquer liquid to the clean seam to clean the clean seam. . However, the cost of lacquer film is high, usually in the case of urgent use.
Third, the oil tank under the oil tank of the diesel engine, the cylinder head, gear chamber cover, crankcase rear cover, etc., as long as the paper pad is complete, the joint is cleaned, can be wiped on the paper pad The upper layer butter, tighten the bolt, can leak. If you switch to a new paper pad, you should soak a new paper pad in diesel before installation, then remove it, and put it on the joint surface.
Fourth, Liquid Sealed Treatment: Solid gasket defects (such as pit, groove, cracking) on ​​diesel engine are formed to form an interfacial leakage and destructive leakage, with liquid sealing rubber to clean a clean solid gasket binding On the surface, uniform, stable, continuously adhered pebble thin film gaskets can be formed after curing, and all leakage can be prevented.
Five, anaerobic glue leakage: When the ventilation bolt on the diesel engine, the double-head bolt, screw plug, etc., use anaerobic glue to clean the clean bolts, threads or screw holes, can be cured Thin film, filling parts voids, and can withstand larger pressure while also have shockproof and anti-loose fastening function. If used for high pressure tubing joints of diesel engine, the effect is better.
Sixth, size recovery glue leakage: the shaft and bushing on the diesel engine, the bearing and the bearing housing, the valve is sitting in the valve, the oil seal, felt cup and the plate filling, etc., the use of size recovery rubber is applied to clean After cleansing parts, etc., after cure, the film layer having a high wear resistance, heat resistant, high mechanical strength is formed, and then the mechanical processing of the vehicle, boring, scraping, and, recovery the geometry and cooperation of the part. Accuracy, to solve leak problems.
Seven, bonding glue leakage: the body parts on the diesel engine, such as frost tank, water tank, tubing, water pipe, etc., the air hole causes leakage, and apply a sticky rubber to clean the clean damage to the cleaning. The effect of leakage.

Our company sells all the year round of Pains, Cummins, Volvo, Shangchai, Yuchai, and Weichai, etc. throughout the country, and provides after-sales service. Service Hotline: 0991-3856119 0991-3817210 0991-3814032 13809953146 18999222000 18609915083 4000991036