Description and difference of each part of diesel generator set

The design of this generator set is a complete combination and provides superover and reliable performance. The main components are indicated, which is a standard generator constructor. However, there may be slight changes depending on the subject of different models. This article makes a brief description of the main part of this electric motor, and details will be described later.
Every partgeneratorThere is a nameplate. Generally attached to the outer casing of the alternator or an empty casing. The information on the nameplate is used to identify generators and operational characteristics, including models, unit numbers, output voltage, phase and frequency and specified power, (output power KVA or KW). In order to provide reference, these materials will be repeated within the technical data table included with this manual. The serial number will not be repeated, and these numbers are required when needed to purchase accessories and warranty services.
1, diesel engine
Diesel engines are the source of power generator, which is thisgeneratorGroup design, performance and reliable performance. The diesel engine belongs to the industrial 4 stroke pressure-resistant, and is supported related accessories to provide stable power supply. The supporting parts include a cylindrical air filter, a partial diesel type number of turbocharger, and a mechanical or electronic governor, and the governor performs a speed of the diesel engine.
2, engine power system
The engine's power system is different from the model, which is 12 or 24 volts negative ground DC voltage system, including a start motor, a charging generator, a battery, in some largegeneratorThe battery may be installed on a power generation and nearby floors. Most generators provide one or two lead-acid batteries that can also be configured with other categories of batteries under the customer's requirements.
3, cooling system
The engine cooling system includes a heat dissipation tank, an axial flow fan and a thermostat. The AC generator has a separate fan to cool his components. Note that the airflow is an alternator. Then passes through the engine and then through the heat dissipation tank.
4, AC generator
The output power is made from a protective cover, a water protection shell, a carbon-free autumn, an automatic regulator generator. The control box is installed at the bottom of it.
5, fuel tank and low frame
Engines and AC generators are installed on a thick steel low. The small power unit can provide a full-load boot for 8 hours according to user requirements, such as no special requirements, fuel tanks are prepared by users.
6, shock absorber
This generator is equipped with a shock absorber, which is designed to reduce generators in the basis of the shock to convey the basis, and these damper are mounted between the engine / alternator foot and the chassis. However, at a larger generator, the engine / alternator city is fixed on the chassis, while the shock absorber is provided to the customer to be installed on the chassis and foundation.
7, silencer and exhaust system
Exhaust silencer is randomly attached to the treatment, silencer and exhaust system reduce noise and can directly discharge the exhaust gas outdoors.
8, control system (identification)
There are a variety of types of control systems that have one of the units to control operation and output, and protect the unit to damage the machine due to incorrect operation.
9, power output air switch
In order to protect the AC generator, a power switch suitable for related models and related power output is in a separate switch box, in some cases, the switch may be together with the automatic replacement system or control screen. Generator set technical support website:Www.xjxgdl.com, Generator set technical support hotline: 0991-3856119, 0991-3817210, 0991-3814032, 400-0991036