Daily inspection of diesel generator sets cannot be ignored

Diesel generator setsThe daily inspection of the transmission belt cannot be ignored
In daily inspections in diesel generator sets, most customers will focus on components such as oil pumps, cooling systems. It is indeed important that these components are important, but they can't ignore other components. Today, Tonglong's power To introduce everyday inspections of diesel generator sets.
1. The primary intuitive look at the drive belt is not overwear, and the grinding place is equal. If you find a problem, replace the transmission belt.
2. Measure the tension of the drive. The drive belt will cause the transmission tape to slip when the transmission belt is slippery, and the drive belt will cause damage to the generator bearings and pumps. The tension of the transmission belt can use the thumb to press the transfer belt in the middle of the pulley. If the pressure below the transmission belt is about 10 mm, then the transmission belt tension is solely appropriate; if the amount of pressure is too large, the tension of the transmission belt is lacking; if The transmission belt does not exhibit the amount of pressure, and the tension of the transmission belt is too large. Too tight and too loose should be adjusted.
Although the drive belt is not a core component in the diesel generator, if the unit is not working properly, you must be meticulous and comprehensive when you perform your daily inspection work, so you can guarantee the normal operation of the unit.