Common fault analysis and treatment method of diesel generator sets

Fault cause treatment method:
1. The battery is low - check the battery charging.
2, battery line and plug loose - check and fasten the battery line and plug.
3, intermediate relay failure - check whether the intermediate relay action is normal.
4, starter failure - maintenance starter.
5, the oil supply system is not smooth; no oil - the air in the fuel system, the dredge pipe makes the fuel to overhaul the oil pump, and clean the initial filter.
6. Start the button, start the loop contact poor - replace the button, check the boot loop.
7, fuel injection tissue oil-projected (oil supply is not smooth) - Check the oil path from the fuel tank to the oil pump without leakage, blockage.
8. The fuel system penetrates the air - open the exhaust screw to check the oil situation.
9. The injection pump fuel injection time is not accurate or fuel injection pump fault - retraining the injection pump time.
10, the governor operating the handle position is not pair - starting, placing the governor handle in the no-load position.
11, electric tuning board, actuator, speed sensor, etc., circuit faults - respectively check the corresponding equipment and loops, respectively.

Our company sells various brands, models, specific diesel generators all year round, and provides after-sales service. Service Hotline: 0991-3856119 0991-3817210 0991-3814032 13809953146 18999222000 18609915083 4000991036