By feet, inspection, adjustment, net, use, wear extending unit life

Star Diesel Generator Engineering Department provides information: through foot, inspection, adjustment, net, use, and wear six mouth to extend dieselgeneratorGroup life method. Diesel generator sets have been commonly used in our daily lives and work. In the past summer, the diesel generator sets have played the best, the diesel generator is best selling in the coldest and hottest season. The convenience is coming. The price of diesel generator sets is not very cheap, so there is a better use of diesel generator sets, extending its service life, mainly providing six major mouths, making the service life of diesel generator longer.
First, the foot is oil, the water, the air is full. If the oil supply is insufficient or interrupted, it will cause the engine lubrication, the body wear is serious, and there is a flask. If the cooling water is insufficient, the mechanical temperature will be too high, the power is lowered, the wear is intensified, and the service life is shorter; if air supply is not timely or interrupted There will be difficulties in starting, poor burning, low power, and the engine cannot be normal.
Second, the test is often checked. Because the diesel engine and gasoline engine are influential, the bolt and nut are easy to loosen during the use of vibration impact and load during use. The adjustment bolts of each part must be examined to avoid accidents of the body due to loose and damage.
Third, the dumor gap, the gas supply phase, the oil supply advance angle, the fuel pressure, the oil supply, the injection pressure, and the ignition timing should be checked and adjusted to ensure that the engine is in good condition, and can save fuel and extend the service life.
Fourth, the net is the net, the water is net, the air is clean and the body is net. If the diesel, gasoline is not pure, it will cause the precision mating body to wear, with the gap, resulting in oil leakage, drip oil, oil supply pressure, gap, and even cause a serious failure of oil roads, hugging, and burning. If the air contains a large amount of dust, the wear of the cylinder jacket, the piston and the piston ring will be accelerated; if the cooling water is not pure, the cooling system will block the scaling of scale, impede engine heat dissipation, and the lubrication conditions are deteriorated; if the body is worn; The appearance is not net, which will cause the surface to be corroded and shortened service life.
5. Use the engine correctly. Before driving, you should lubricate each axis and watts. After starting, you should be in the water temperature at 40 ° C or more. It is strictly forbidden to overload or low speed. Before the stop, you should remove the load to reduce the speed. When parking in winter, the water temperature should be lowered to 50 ° C, and the cooling water (except for the engage of antifreeze). Usually do a good job in the maintenance of the engine, so that the machine is always maintained in a good condition. It is necessary to observe, check, discovers the fault, and troubleshoot.
Sixth, grinding is grinding. This is the basis of extending the life of the engine. Whether it is a new engine or an overhauled engine, it must be engaged in normal operations after the procedure is erased.
Although the above six mouth seems to be very simple, it is also very complicated, if you want to extend dieselgeneratorThe service life of the group must do these six work.